* YAMAHA RT(RTX)シリーズでPPPoE接続する [#mb1fd59f]
 
 光プレミアムでは、''MTU 1438''、''MSS 1386'(IPヘッダ20,TCPヘッダ20,TCPヘッダオプション部分12)となる。
 
 ** 概要 [#oa77f58f]
 
 ctu.fletsnet.com(210.247.16.1), security.fletsnet.com (210.247.16.2) といった物にも、192.168.0.0/24 のセグメントから接続し、且つ、YAMAHA RT/RTXシリーズでPPPoEも同時に接続させたいといった場合の接続サンプルとなる。
 
 
 ** ネットワーク構成図 [#ta1201ae]
 
    +---------+
    |   ONU   | 
    +---------+
         |
    +---------+
    |   CTU   | 
    +---------+
         |.1
         |
  +----+----------------------+(192.168.24.0/24)
         | 
    LAN3 | .10 (NAT) / PPPoE
   +---------+
   | RTX1100 | 
   +---------+
    LAN1 | .1
         |
  +---------------------------+(192.168.0.0/24)
         |
   PC1  PC2  PC3 ... 
  
 
 
 
 ** config [#cf38b892]
 
  console prompt GW-RTX:
  ip route default gateway pp 1
  ip route 210.247.0.0/17 gateway 192.168.24.1
  ip lan1 address 192.168.0.1/24
  ip lan3 address 192.168.24.10/24
  ip lan2 proxyarp off
  ip lan3 proxyarp off
  pp select 1
   pp always-on on
   pppoe use lan3
   pppoe auto connect on
   pppoe auto disconnect off
   pppoe disconnect time off
   pp auth accept pap chap
   pp auth myname my-isp my-pass
   pppoe tcp mss limit 1386
   ppp lcp mru on 1438
   ip pp mtu 1438
   ppp ipcp ipaddress on
   ppp ccp type none
   ip pp intrusion detection in on
   ip pp intrusion detection out on
   ip pp nat descriptor 1
   pp enable 1
  nat descriptor type 1 masquerade
  nat descriptor timer 1 300
  nat descriptor timer 1 protocol=tcp port=www 30
  nat descriptor timer 1 protocol=udp port=domain 30
  nat descriptor timer 1 protocol=tcp port=domain 30
  nat descriptor timer 1 protocol=tcp port=22 1800
  nat descriptor timer 1 protocol=tcp port=ftpdata 1800
  nat descriptor timer 1 protocol=tcp port=ftp 1800
  nat descriptor address inner 1 192.168.0.1-192.168.0.254
  nat descriptor masquerade rlogin 1 on
  syslog host 192.168.0.X
  syslog notice on
  tftp host none
  telnetd host 192.168.0.X
  httpd service off
  upnp use off
  dns service recursive
  dns server pp 1
  dns server select 1 192.168.24.1 a fletsnet.com
 
 あとは、DHCPサーバの設定等、行ってください。~
 実機が無い状況で書いていますので、後日実際に動作検証をします(-_-;;;
 
 
 ** IPv6 to IPv6 IPsec [#v3fda834]
 
 
 ** 参考資料 [#g5e8805e]
 
 - [[ヤマハの音とネットワークを語る - 光プレミアムの設置(その2):http://projectphone.typepad.jp/blog/2008/03/2-pppoe-509f.html]]
 - [rt100i-users 37933] 光プレミアムの PPPoE を使用しつつ CTU にアクセスする方法
 - [rt100i-users 37785] 西日本ひかりプレミアムで、 FTP サーバが転送完了で終了できない
 
 ** コメント [#w3ba430f]
 
 #COMMENT
 
TOPページへ戻る   新しいページの作成新しい下位ページの作成そのページを引用して新規作成ページ名の変更ページへのリンク元を表示   サイトのページ一覧サイト内単語検索編集したページの履歴削除したページの履歴   別ウィンドウでマニュアルページへ