# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #0: Tue Oct 14 13:45:17 JST 2008
    root@gw3.80.local.gyojya.jp:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Processor model unknown (2600.02-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x70ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11d<LAHF,SVM,ExtAPIC,CR8,Prefetch>
usable memory = 1059311616 (1010 MB)
avail memory  = 1019080704 (971 MB)
ACPI APIC Table: <HP     ML115 G1>
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HP ML115 G1> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfcbbf000-0xfcbbffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcbbec00-0xfcbbecff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xfcbbd000-0xfcbbdfff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xfcbbc000-0xfcbbcfff irq 20 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 8.0 on pci1
pci2: <PCI bus> on pcib2
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xec00-0xec1f mem 0xfafff000-0xfaffffff,0xfcf00000-0xfcffffff irq 16 at device 4.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:50:8b:b2:3c:c7
fxp0: [ITHREAD]
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xe880-0xe89f mem 0xfaffe000-0xfaffefff,0xfcd00000-0xfcdfffff irq 17 at device 5.0 on pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:50:8b:b2:3c:c8
fxp1: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 11.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 12.0 on pci0
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfdefc000-0xfdefffff,0xfd000000-0xfd7fffff irq 18 at device 0.0 on pci6
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci7: <ACPI PCI bus> on pcib7
bge0: <HP NC320i Integrated Gigabit Server Adapter, ASIC rev. 0x4201> mem 0xfdff0000-0xfdffffff irq 19 at device 0.0 on pci7
miibus2: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:1e:0b:bc:75:38
bge0: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci8: <ACPI PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <American Power Conversion Smart-UPS 750 FW:651.12.A USB FW:4.2, class 0/0, rev 1.10/0.06, addr 2> on uhub0
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on uhub0
kbd2 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on uhub0
ums0: 8 buttons and Z dir.
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
Timecounter "TSC" frequency 2600017434 Hz quality 800
Timecounters tick every 1.000 msec
cpu0: Px state: P0, 2700MHz, 100000mW, 100us, 9us
cpu0: Px state: P1, 2600MHz, 92762mW, 100us, 9us
cpu0: Px state: P2, 2400MHz, 79286mW, 100us, 9us
cpu0: Px state: P3, 2200MHz, 67090mW, 100us, 9us
cpu0: Px state: P4, 2000MHz, 56114mW, 100us, 9us
cpu0: Px state: P5, 1800MHz, 46296mW, 100us, 9us
cpu0: Px state: P6, 1000MHz, 24589mW, 100us, 9us
cpu0: Px method: AMD K8 Cool'n'Quiet
ZFS filesystem version 6
ZFS storage pool version 6
ad1: 381554MB <Seagate ST3400832A 3.01> at ata0-slave UDMA100
ad4: 286188MB <Maxtor 6V300F0 VA111900> at ata2-master SATA300