GR2000 RouterOS インストール方法 †

対象: GR2000-1B、GR2000-2B (Bシリーズ) †

select(0/1):0
login: operator

> en

# resize

# format mc
# MC initialize OK? (y/n): y

# cd /mc0/usr/var/update/

# ppupdate UPDATE.tgz secondary active

Software update start

Broadcast Message from operator@
        (/dev/tty00) at 19:17 ...

***********************************************
** UPDATE IS STARTED.                        **
***********************************************

New version is S-XXXX-XX XX-XX-/C
Do you wish to continue? (y/n) y
Updating MC slot1
Update done.

Broadcast Message from operator@
        (/dev/tty00) at 19:20 ...

***********************************************
** UPDATE IS FINISHED SUCCESSFULLY.          **
***********************************************


# cd /mc0/usr/var/update/
# cp UPDATE.tgz /mc1/usr/var/update/

# show version
Model: GR2000-2B  Serial No.: XXXXXXXXXXXXXXXXXX
S/W: S-XXXX-XX XX-XX-/C [ROUTE-OS8B, Routing software]
H/W: RM0  INTERNAL [Basic Control module, 0000]
     RP0  INTERNAL [Routing processor, 0000]
     NIF00 HN-F9531-311 [NWBMX2-4, 2-port serial 1-port PRI 1-port BRI, 0002]
           Serial No.: 0D XXXXXXXXXXXXXXX
     NIF01 HN-F9531-372 [NAB25M-1, 1-port 25M ATM, 0000]
           Serial No.: 0F XXXXXXXXXXXXXXX
     NIF02 INTERNAL [4-port 10BASE-T/100BASE-TX, 0000]
RM0/MC0: HN-F9531-MC256 [BMC256, 256MB compact flash memory card] 003b0000
         S-XXXX-XX XX-XX-/C [ROUTE-OS8B, Routing software]
RM0/MC1: HN-F9531-MC256 [BMC256, 256MB compact flash memory card] 00450401
         S-XXXX-XX XX-XX-/C [ROUTE-OS8B, Routing software]

インストールしたMCにインストールしたバージョンが入っているか表示される。 正常に表示されればインストールが成功。

# reload

対象: GR2000-2S、GR2000-4S (Sシリーズ) †

select(0/1):0
login: operator

> admin

admin: resize
admin: mc format -f
admin: ppupdate /mc0/usr/var/update/UPDATE.tgz secondary

Software update start

Broadcast Message from operator@
        (/dev/tty00) at 0:11 ...

***********************************************
** UPDATE IS STARTED.                        **
***********************************************

Current version is S-9181-21 04-01-/B
New version is S-9181-21 04-01-/B
Do you wish to continue? (y/n) y
Updating MC slot1
Update done.

Broadcast Message from operator@
        (/dev/tty00) at 0:15 ...

***********************************************
** UPDATE IS FINISHED SUCCESSFULLY.          **
***********************************************

   完了後、/mc1/usr/var/update/ にアーカイブが存在するか確認。

admin: ls -la /mc1/usr/var/update/
admin: cp /mc0/usr/var/update/UPDATE.tgz /mc1/usr/var/update/

admin: version -a
Model: GR2000-2S
S/W: S-9181-21 04-01-/B [ROUTE-OS2, Routing software]
H/W: RM0  INTERNAL [BCU, Basic Control module, 0000]
     RP0  INTERNAL [RP-A1, Routing processor, 0002]
     NIF00 HN-F9533-371M [NAOC3-1M, 1-port OC-3c/STM-1 ATM(multi-mode), 0000]
     NIF01 ----------
     NIF02 INTERNAL [NE100-4TA, 4-port 10BASE-T/100BASE-TX, 0003]
RM0/MC0: HN-F9533-64 [MC64, 64MB flash memory card]
         S-9181-21 04-01-/B [ROUTE-OS2, Routing software]
RM0/MC1: HN-F9533-64 [MC64, 64MB flash memory card]
         S-9181-21 04-01-/B [ROUTE-OS2, Routing software]